Simple practices that help a UPS or inverter system last. These points come from the company’s own product guidance.
Do
- Install the UPS and batteries in a ventilated area.
- Install the UPS on a flat surface only.
- Ensure the battery terminals are properly tightened.
- Use rated MCBs, fuses and battery cables only.
- Keep the switch in FC mode when a computer is working.
- Keep the UPS away from children, water and chemicals.
- Switch off the front-panel switch before disconnecting the UPS.
Do not
- Do not use the Home UPS with a local (unbranded) battery combination.
- Do not install the UPS or batteries in a closed container.
- Do not disconnect the batteries while the UPS is on.
- Do not connect the battery cables in reverse.
- Do not mix batteries of different ratings or makes.
- Do not connect the UPS to loads other than those recommended.
- Do not connect the UPS output to a generator or to the incoming utility supply.
For product-specific instructions, see the brochure for your model or contact the team.